To use CaddieSync, first power on your SkyCaddie. Connect the enclosed USB cable to both your SkyCaddie and computer, then press the Sync button.
Please turn on your SkyCaddie by pressing the Center Soft Key. If the screen remains blank after pressing this button, you may need to charge the battery.
Please make sure that the cable provided with your SkyCaddie is plugged into the corresponding port on the bottom edge of the SkyCaddie. You may need to slightly adjust the protective hole cover to make this connection.
Plug the other end of the same cable into an available USB port on the front or back of your computer (the USB port may be located on the side of your computer, if you are using a laptop).
Click on the Sync button below and get started!